Satellite Network Management
In the fields of oil and gas, mining, forestry, and ocean transportation, due to the lack of communication infrastructure, IoT data cannot be transmitted through traditional optical fiber, 4G, or other communication networks. The only solution is to transmit IoT data through satellites.
Cowave White-Whale Satellite IoT System is a satellite data transmission system specially designed for IoT applications. It adopts a TDMA technology system and dedicated communication protocol. The system supports the division of multiple data subnets and the satellite terminals of each data subnet share a service channel.
Specification of White Whale NMS for IoT via Satellite
|
NETWORK MANAGEMENT SYSTEM
|
|
QUANTITY OF TERMINALS SUPPORTED
|
≥1 million
|
|
TRANSMISSION SYSTEM
|
Specially optimized TDMA communication system for IoT
|
|
REAL-TIME STATUS DISPLAY
|
Real-display of information, such as work status of system terminals, amount of sent/received data, and resource utilization rate
|
|
EVENT MANAGEMENT
|
Centralized display of events in the system, including networking, network quit, and network management
|
|
IOT TERMINAL CONFIGURATION
|
Support configuration of IoT terminal and master station terminal through graphic mode
|
|
CONFIGURATION OF CENTRAL STATION
|
Support configuration of antenna and terminal in the central station through graphic mode
|
|
TOPOLOGY MANAGEMENT
|
Display information of terminal status on E-map and support network quit
|
|
CONFIGURATION OF SATELLITE RESOURCES
|
Support configuration of parameters, such as satellite, wave number, repeater, and frequency of data sub-net, through graphic mode
|
|
CONFIGURATION OF DATA SUBNET
|
Support configuration of multiple data subnets and each data subnet is configured with specific satellite resources
|
|
DYNAMIC DISTRIBUTION OF BUSINESS TIMESLOT
|
Distribute the communication timeslot of the IoT terminal based on business rate demands
|
|
TERMINAL COMMUNICATION CONTROL
|
Support data transmission termination and network quit of terminal
|
|
DATA QUERY AND STATISTICS
|
Support query and statistics of operation data by the condition of time, terminal, and data subnet
|
|
FAULT ALARM
|
Support fault alarm of terminal device in the master station and highlight it in the user's interface
|
|
PERFORMANCE ALARM
|
Conduct regular statistics of system utilization rate and give out an alarm when exceeding the threshold
|
|
SYSTEM AUTHORITY CONTROL
|
Provide user-based access control, assign different operation authorities to administrator and common user
|
|
INTERNATIONALIZATION SUPPORT
|
Support multiple languages on user interface and one-key switching of interface language
|
|
REMOTE MANAGEMENT
|
Control center software is based on B/S architecture and supports the remote operation of the administrator via network
|
|
SYSTEM HOT BACKUP
|
Both system service progress and database support local/remote 1:N hot backup
|
|
UNATTENDED OPERATION
|
Enter auto running after system configuration without any manual interference, support 7×24h operation
|
|
CENTRAL STATION TERMINAL
|
|
SYSTEM
|
TDM/TDMA
|
|
ANTENNA FREQUENCY RANGE
|
Forward: 14.0GHz～14.5GHz; Return: 12.25GHz～12.75GHz
|
|
MODULATION
|
QPSK
|
|
FEC
|
LDPC (1/2)
|
|
NUMBER OF FORWARDING CHANNELS
|
16
|
|
DATA RATE OF FORWARDING CHANNEL
|
64 kbps
|
|
NUMBER OF RETURN CHANNEL
|
16
|
|
DATA RATE OF RETURN CHANNEL
|
64bps~56kbps
|
|
USER SUPPORTED
|
Each forward channel supports ＞2000 users
Each return channel supports ≤1024 users
|
|
WORK FREQUENCY
|
L Band: 950 to 2150 MHz, 100 Hz step
|
|
ROLL-OFF
|
35%
|
|
THRESHOLD EB/N0
|
2.5 dB
|
|
WEIGHT
|
10kg
|
|
DIMENSIONS
|
4U
|
|
POWER SUPPLY
|
100 to 240 VAC, 50-60 Hz
|
|
POWER CONSUMPTION
|
≤300W
|
|
DATA INTERFACE
|
RJ45, RS232/RS485
|
|
CONTROL INTERFACE
|
RJ45
|
|
CONNECTOR
|
75 ohm Type N female
|
|
REMOTE TERMINAL
|
|
SYSTEM
|
TDM/TDMA
|
|
DATA RATE
|
64bps～12Kbps
|
|
ANTENNA FREQUENCY RANGE
|
Forward: 14.0GHz～14.5GHz; Return: 12.25GHz～12.75GHz
|
|
MODULATION
|
QPSK
|
|
FEC
|
LDPC (1/2)
|
|
CHANNEL NUMBER
|
1 forward/return channel respectively
|
|
USER SUPPORTED
|
≤1024 users
|
|
ROLL-OFF
|
35%
|
|
THRESHOLD EB/N0
|
2.5 dB
|
|
POWER SUPPLY
|
24V
|
|
POWER CONSUMPTION
|
≤20W
|
|
DATA INTERFACE
|
RJ45, RS232/RS485
|
|
CONTROL INTERFACE
|
RJ45
|
|
CONNECTOR
|
50 ohm Type SMA female
|
Features of White Whale NMS for IoT via Satellite
01
Transmission of IoT Data via Satellite— The satellite terminal adopts a solar power supply and maintenance-free design and can run around the clock after installation, completely solving the data transmission problem of the IoT in remote areas.
02
IoT Data Transmission for Oil And Gas Wells— The application of IoT technology makes the oil and gas mining process more automated, lower cost, safer, and more reliable. The improvement of this process relies on the collection, transmission, and processing of a large number of sensor data.
White Whale NMS for IoT via Satellite Gallery
White-Whale Satellite IoT System adopts TDMA technology system and dedicated communication protocol which can support massive terminal networking.
As an advanced satellite productions inc, we will do our best to meet all the needs of customers.
